Ok, let's start. Read carefully all the instructions.

I made a previous version that has a lot of flaws, mainly in the beard zone, also has some issues with the eyebrows.

I made some major improvements, i had to redo the vectorial draw to fix all the spots with problems. I added a tongue, because the space in black looked really bad.

The 3mf file that has been upload, has 2 options:

1st option (without AMS): You have all the pieces grouped by colors, so, you only need to print one color at a time, I've already print it in this way, so i know it works. I recommend to print all the plate by objects (others→print sequence: By object), THE ONLY problem with this option is that's not possible to PAUSE the printing to change the filament, with all the settings, the layers are 20, so it will iniate the second print at 21, if you're watching the print, you can pause it manually and it will continue with the new color***.

All the tolerances had been carefully adapted, so, if you're assembling all the parts, you won't need to make any adjustments, unless you're filament settings requires it. The line width was modified to use a 0.4 nozzle.

2nd option (With AMS): I've already coloured all the parts, so it should be an easy print. The height is modified to 5 mm, it should take around 2 hours of print, you have to use 2 AMS to print with all the colors.

***: if you know a way to pause the print after an object it's done, I'd really appreciate if you can contact me or leave a comment, it will be really helpful to me.

share, like and enjoy!