Naruto Sixth Path Sage Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x247.58mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 3.1mm and the Actual Depth is 2.6mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Orange Transmission Distance: 7
PLA PolyTerra Savannah Yellow Transmission Distance: 3.5
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 5 unique filaments

Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Blue
At layer #12 (1.04mm) swap to Orange
At layer #21 (1.76mm) swap to Savannah Yellow
At layer #27 (2.24mm) swap to Jade White for the rest.