HEXAGONAL PEN TIN

**Print-in-place**

No support needed

Hexagonal pencil, pen, toothbrush... etc. holder with a modern minimalist aesthetic.

Super easy to print in any color to match your decor or desk!

⭐⭐⭐⭐⭐

To get the most out of the STL file, follow these guidelines:

• No support needed. Everything is Print-in-Place.
• Layer height 0.2mm
• Nozzle 0.4mm
• Recommended infill 15%.
• 2 walls are fine. With 3 you will have a little more resistance.
• Prepare and clean your bed for excellent adhesion.
• Please choose a printing speed that your printer can handle and provide the best quality outputs.
• Make sure your bed is properly leveled. Then double check.
• Try to hide the seam and place it where no one will pay attention to it (usually on the back).
• Make sure the printing and bed temperatures are right for the filament you are going to use.