Samuel L Jackson "I Don't remeber asking you…" fridge magnet.
This print needs 2x 8mm diameter by 2mm deep magnets that push into the back after printing. You may want to add a dot of ca glue but they're a pretty snug fit.
It's designed based on 4 colours to work in a single AMS, you will need black, brown, white plus one other colour for the text highlight, I went with yellow but red or orange would look good too in my opinion.
I have included the models I used to create this but it is a pain to do so I advise just going with the 3mf file.... If you want to assemble it yourself first add the black base step file, this is made of 2 objects, the base which should be black and the text which you can use whatever colour you like.
The right click and add part - load - Sam black.stl
This is the black layer, you'll need to position it so it rests on the base in the space next to the text... Be be careful to make sure there's no gap in the z axis between the parts..
Then repeat the above but load in Sam brown.stl... You'll need to align it perfectly with the black layer..
And repeat again for Sam white.stl
Assign your filament colours to each object.
This does need to be printed at .08mm layer height to get the detail in the image.