Bambu Lab Spool Label - with indicator

Bambu Lab Spool Label - with indicator

Boost
970
1870
197
This model is created by Make My Sign
Make Your Model

Print Profile(4)

All
X1 Carbon
P1S
P1P
X1
X1E
A1
A1 mini

0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
Designer
1.4 h
3 plates
4.8(144)

☆Quality☆ NO AMS 0.16mm layer, 2 walls, 15% infill
☆Quality☆ NO AMS 0.16mm layer, 2 walls, 15% infill
1 h
1 plate
4.8(12)

0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
2 h
1 plate
4.7(12)

Adapted for A1 Mini - One Plate
Adapted for A1 Mini - One Plate
1.1 h
1 plate
5.0(3)

Boost
970
1870
197
0
1.9 k
1.5 k
Released

Description

Easily add labels to your Bambu Lab reusable spools, with a remaining filament estimator!

Compatible with Make My Sign for custom labels.

 

 

I absolutely love the Bambu Lab reusable spools, but you're either stuck with the original label, or have none at all.

I also like the indicator on their labels that gives you an estimate of how much filament is remaining.

 

So I designed this press-fit label holder for the spools!

FEATURES

  • Indicator shows estimated remaining filament (200g, 400g, 600g, 800g)
  • Coloured zone for under 200g (a reminder to order more filament!)
  • Press-fit design snaps onto the spool
  • Compatible with AMS
  • Easily change labels for different materials

INCLUDED LABELS

I've included many common material labels, all generated through Make My Sign.

Just duplicate the labels you want from “Common Filamanet Labels” to the “Copy labels to print here” plate, and your project will remain organized.

  • PLA
  • PLA Matte
  • PLA Tough
  • PLA Marble
  • PLA Metal
  • PLA Silk
  • PLA Sparkle
  • HTPLA
  • PLA-CF
  • PLA Aero
  • PLA Alu(minium)
  • PLA Steel
  • Polylite PLA
  • PETG
  • PETG-CF
  • ASA
  • ASA-CF
  • ABS
  • PA
  • PC
  • PA6
  • PAHT-CF
  • TPU95
  • Supp(ort) PLA
  • Supp(ort) PETG

Label designs powered by Make My Sign from MakerWorld(makerworld.com/makerlab/MakeMySign)

MAKE YOUR OWN LABEL

You can create your own labels in Make My Sign, as long as you use the following settings:

  • Rectangle Base Plate, 1mm thick, 1mm corner radius, Hole: None
  • 10mm Height
  • 43mm Width

I used Roboto font for the included labels at size 36. If you have a 0.2mm nozzle, I'd recommend using a smaller font if you want to fit more text on the label.

 

MATERIAL CHOICE

When choosing the material to print in, consider the environment your spool may be in.

If you dry your materials, try to choose a filament that won't soften when your spool is in a dehydrator/heater.

  • PLA is fine for PLA spools, and may be ok for PETG (not tested)
  • PETG and ABS are better for higher temp filaments.

The example models used:

  • Bambu Lab PLA Matte White
  • Bambu Lab PLA Basic Red
  • Bambu Lab PLA-CF

 

REMOVAL

If you want to remove the label holder for whatever reason, you can pop it off using a scraper. Wedge the blade underneath the holder and lift. If the pins break off, you can just push them through the holes in the spool using a small tool (e.g. hex key) and remove the debris.

Comment & Rating (197)

Please fill in your opinion
(0/5000)

Print Profile
0.2mm layer, 2 walls, 15% infill
Fits perfect, easy to print and now part of stuff every Bambu user should have list. I left my "professional" old tags i was using for comparison 😂 Printed some custom tags, next time i should double-check my Filament profile 😅
The designer has replied
3
Reply
love the little container too!
(Edited)
1
Reply
Replying to @TrendtB :
It's just a prototype 😅, but should be released soon.
(Edited)
2
Reply
Print Profile
☆Quality☆ NO AMS 0.16mm layer, 2 walls, 15% infill
really good quality
(Edited)
2
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Fits very snug, so you don't have to worry about it falling out. Also, you can easily swap out the label tags, but they also fit snug enough not to fall out. Nice design. I'm going to put one on each of my spools.
The designer has replied
1
Reply
Glad to hear you like it! Thanks for the comments, it is greatly appreciated
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Thats really cool. Fits perfectly and is helpful, expecially after you got refills.
The designer has replied
1
Reply
Thanks for the feedback and the rating! glad you find it helpful
(Edited)
1
Reply
I cant seem to "paint" everything. Look at my pictures. When I paint it, it appears its all red, but when I slice, there is a layer of black there. What is going on?
The designer has replied
0
Reply
Hey - have you calculated the flushing volumes?
0
Reply
Print Profile
☆Quality☆ NO AMS 0.16mm layer, 2 walls, 15% infill
One of the fastest and easiest thing to print and yet super useful 💪🏻
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
I like it! The model is well crafted, everything fits perfectly, and it remains stable. The indicators showing the remaining material are very accurate and closely match when weighed on the scale Very useful for dummies like me who forget what material is on the spool 😂 You really had a great idea!
The designer has replied
0
Reply
Great to hear its working for you! Thanks for rating :)
0
Reply
Print Profile
☆Quality☆ NO AMS 0.16mm layer, 2 walls, 15% infill
ok
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Verry cool print!!!
The designer has replied
0
Reply
Nice!
0
Reply
This doesn’t seem to work for certain bambu spools with the smaller holes. The holes don’t align with the pin. Is there a different version for those spools?
0
Reply