Simple Peg Bobber float

Hello, I designed this model in order to be able to make fishing cheaper. If you like fishing like I do, then you will know it is very pricey. I designed this bobber, and it only costs around $.20 to print. A pack of cheap bobbers costs around $3 for a 5 pack. Here are some basic print settings:

Larger piece:

Walls: 3

Infill: 5

Material: Pla, Petg, Abs, etc.

Smaller piece:

Walls: 3

Infill: 100

Material: Pla, Petg, Abs, etc.

Post processing: remove the brims, and sand the inner tube in the main bobber body, then sand the outside of the peg, paint the main body if you would like, but do not paint the peg.

Here are the instructions to assemble it:

Step 1, Pull your line through the eyes of your rod, and pull it out until you get to your reel.

Step 2, thread your line through the top of the bobber(the fat part) to whatever length of liter line you want

Step 3, Push the peg (the smaller piece) through the bottom of the bobber, making sure to keep the line out of the notch in the peg

Step 4, Have fun fishing