Fall Pumpkin

Fall Pumpkin

Greeting, I have dropped a unique Hueforge that will be great for any home gallery. This print was generated using AI and publish to a stock image portfolio. Stock images can be purchased through Adobe Stock.

Note: This image is intellectual property of Petra3d.

File, or physical copies may not be sold.

However, I offer commercial use subscription that can be obtained on our Patreon.

Link for Subscription: www.Patreon.com/Petra3D

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 285.71x285.71mm in size

You may print at higher layer heights below the Min Depth of 2mm

The Max Depth is 5.3mm and the Actual Depth is 4.9mm

Filaments Used:

• PLA BambuLab Matte Charcoal
• PLA BambuLab Matte Dark Brown
• PLA BambuLab Matte Scarlet Red *Basic Orange as seen in Photo*
• PLA BambuLab Basic Yellow
• PLA BambuLab Basic Orange
• PLA BambuLab Matte Ash Gray
• PLA BambuLab Matte Mandarin Orange
• PLA BambuLab Matte Ivory White

This print uses 8 unique filaments

Swap Instructions:

• Start with Charcoal
• At layer #32 (2.64mm) swap to Dark Brown
• At layer #35 (2.88mm) swap to Scarlet Red (or Basic Orange)
• At layer #38 (3.12mm) swap to Yellow
• At layer #41 (3.36mm) swap to Orange
• At layer #45 (3.68mm) swap to Ash Gray
• At layer #46 (3.76mm) swap to Mandarin Orange
• At layer #47 (3.84mm) swap to Charcoal
• At layer #53 (4.32mm) swap to Mandarin Orange
• At layer #56 (4.56mm) swap to Ivory White for the rest.

Slicer Settings I Use: Wall loop (1), Top Surface pattern (Monotonic Line), Top Shell Layers (9), Top Shell Thickness (1mm), Bottom Surface Pattern (Monotonic), Bottom Shell layers (999), Internal Solid Infill Pattern (Rectilinear), Sparse Infill density (100%), Sparse Infill Pattern (Rectilinear). G-code output (UNCHECK Reduce infill retraction) ****** This prevents the tool head from scraping print.

Insure the pauses are set for swap in slicer. Please reach out for any help or questions.

• -Insure proper bed adhesion.
• -insure calibrations.
• -Insure proper filament drying.