Mesh Box
Print Profile(1)
Description
I made this box to store silica in my drawer where I keep some filaments, but it can be used for other purposes, such as a pen holder or any other use you may need.
The side mesh is made of infill density, so it can be changed in the parameters, just be careful to keep the fixing pins on the top of the piece attached.
I made the mesh very closed so that no piece of silica would fall into the drawer, as happens with some models.
Instructions
The fitting requires a little downward force, as you can see in the video, if done in the correct direction with the locks facing the right way there is no need to be afraid of breaking it.
Note: You can change the sides after you have fitted them, but it is not recommended. They need to be removed very carefully as they fit very well.
Hope this helps :)
Boost Me (for free)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)