Lechuza Planting Plate Adapter

Lechuza Planting Plate Adapter v 1.1 (Fixed leg height to fit higher domed pot base)

This adapter is compatible with Lechuza pots that use a stick and wick system. It allows one to convert these self-watering pots into a functional pot even if the plant doesn't have its own nursery pot.

If you'd like to support my projects or obtain a commercial license, consider joining my Patreon membership: 

https://www.patreon.com/MochPoch 

For one-time support, you can also fuel my creativity with a cup of coffee: 

https://buymeacoffee.com/MochPoch 

There are 2 adapter sizes available:

• 14 cm
• 16 cm

The following Lechuza wick and stick system should be compatible:

• Cube Color 14 / 16
• Cube Glossy 14 / 16
• Cube Color Triple
• Yula
• Ojo
• Canto Stone 14

disclaimer: This model has been tested on Cube Color 14 and 16 pots. If it does not match completely, please let me know if you'd like adjustments

Simply confirm if your pot falls under these systems and which dimension matches.

PETG is the preferred material since it will be submerged in water.

1. Position the top of the adapter on the bed plate
2. Set wall loop to at least 4
3. Set top and bottom layer count to at least 3
4. Enable Organic Tree Support. (This will be minimal and only for the middle leg that allows for the most water intake.)

The following steps are suggested in order to prolong the life of your print. The option you choose depends on the material you printed with:

• Applying a coat or sealant, or
• Sanding the portions in contact with water.

Thanks for checking out this model. Other projects in collection.

You might be interested in my other systems: