P1S/X1C Glass Door Corner Accent

P1S/X1C Glass Door Corner Accent

Boost
62
132
57

Print Profile(2)

All
P1S
P1P
X1
X1 Carbon
X1E
A1

0.2mm layer, 1 walls, 0% infill
0.2mm layer, 1 walls, 0% infill
Designer
9 min
1 plate
4.8(49)

0.6mm nozzle, 0.3mm layer, 1 walls, 0% infill
0.6mm nozzle, 0.3mm layer, 1 walls, 0% infill
Designer
9 min
1 plate

Boost
62
132
57
1
193
254
Released

Description

Add a touch of colour to personalise your printer's glass door with this simple vase-mode print. Slots in place without adhesive. If it's loose, add a bit of Blu-tack. 

 

Also serves as a visual cue so you don't poke yourself in the eye when the door is open. Works great with bright colours or dual/triple filaments. Can be placed on both top and bottom corners.

 

An STL file for 0.6 mm nozzles is provided and I find it produces cleaner vase mode prints. The 0.6 mm version doesn't fit the bottom corner as the walls are thick.

 

Update: The 0.6 mm version has been updated to remove the top few layers to improve print quality and fit. You may still need to nip off the initial blob of the elephant's foot. 

 

Comment & Rating (57)

Please fill in your opinion
(0/5000)

Print Profile
0.2mm layer, 1 walls, 0% infill
Fit good
1
Reply
Print Profile
0.2mm layer, 1 walls, 0% infill
Slides off easy but it's good
1
Reply
Print Profile
0.2mm layer, 1 walls, 0% infill
good print, and fit on glass
1
Reply
Print Profile
0.2mm layer, 1 walls, 0% infill
okokok
0
Reply
Print Profile
0.2mm layer, 1 walls, 0% infill
Support Issue:model was filled
The designer has replied
0
Reply
Hi there, what was the issue you encountered? The print should be done in vase mode.
0
Reply
hi, i could figure it out. made two prints. applied all settings from the print profile, but it was not possible to print it without infill :(
0
Reply
Are you using the print profile to directly print from the app? All settings should be correct for the print profile. If you downloaded the STL file, you need to turn on vase mode as the model is indeed solid.
0
Reply
Print Profile
0.2mm layer, 1 walls, 0% infill
1
Reply
Print Profile
0.2mm layer, 1 walls, 0% infill
simple and useful
1
Reply
Print Profile
0.2mm layer, 1 walls, 0% infill
The little touches that add up
1
Reply
Print Profile
0.2mm layer, 1 walls, 0% infill
perfect
1
Reply
Print Profile
0.2mm layer, 1 walls, 0% infill
Very easy!
1
Reply