Tape dispenser - Tape roller
Boost
14
11
8
Print Profile(2)
0,4mm nozzle, 0.2mm layer, 3 walls, 15% infill
Designer
43 min
1 plate
0.6mm nozzle, 0.18mm layer, 3 walls, 15% infill
Designer
41 min
1 plate
Open in Bambu Studio
Boost
14
11
8
0
44
34
Released
Description
I designed this handy tape dispenser for my office. Absolutely worth printing.
Tape dispenser:
- Simple to print model
- No assembly
- Absolutely necessary for your office
- 1 file
- No support needed
Dimensions:
- This model holds a scotch tape with inner diameter of 25mm.
Print time and used material
- Print time: 30 minutes
- PLA Matt Baby blue filament, approximately 23gr
If you find my model useful, please like :-)
Comment & Rating (8)
All
doesnt really cut the tape that well.
0
Reply
Print Profile
0,4mm nozzle, 0.2mm layer, 3 walls, 15% infill
Didn't fit for my tape but still a good print
The designer has replied
0
Reply
Thanks for the comment. The inner diameter of the tape should be between 24,5mm and 26,5mm. I believe the Scotch tape has an internal diameter of 25mm.
If you have a different size of tape you can pas it to me and I'll have a look to upload a second model.
0
Reply
Print Profile
0,4mm nozzle, 0.2mm layer, 3 walls, 15% infill
Nice and compact, works well.
0
Reply
Print Profile
0,4mm nozzle, 0.2mm layer, 3 walls, 15% infill
Print Properly and was exactly the tape circle size I was looking for!
0
Reply
Print Profile
0,4mm nozzle, 0.2mm layer, 3 walls, 15% infill
0
Reply
Print Profile
0,4mm nozzle, 0.2mm layer, 3 walls, 15% infill
0
Reply
Print Profile
0,4mm nozzle, 0.2mm layer, 3 walls, 15% infill
0
Reply
No more
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld