Windump motor Car toy by thogot

thogot

Toys & Games>Other Toys & Games

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

2.7 h

4 plates

4.1(45)

Open in Bambu Studio

Boost

216

427

826

892

Released

Description

gefunden auf https://www.thingiverse.com/thing:1848663

Comment & Rating (81)

@Deploy

Some photo instructions to help those struggling with assembly. Adhesive is only required to fix the wheels to the axles and to secure the hood and trunk into the frame. Fix the trunk with the shortest part to the top or will interfere with the gearing. No more glue is required. 👍 Stages 1 - 8

(Edited)

@Deploy

Stages 9 - 13

@mat646802

Print Profile

0.2mm layer, 2 walls, 15% infill

les dimensions ne permettent pas au système de bien fonctionner. les jeux de fonctionnement sont trop grand.

(Edited)

The designer has replied

@Deploy

Did you assemble it correctly? I have no Issues with mine, it runs perfectly smoothly using my revised profile. You may need to tune and calibrate filaments. Yours must be a citroen. 😀

(Edited)

GIF

@mat646802

Replying to @Deploy :

my X1C is perfectly calibrated.

@Deploy

Replying to @mat646802 :

Did you assemble it correctly? you can see from my GIF it runs just fine. 👍

@Frog01

Print Profile

0.2mm layer, 2 walls, 15% infill

fun fun fun

The designer has replied

@Deploy

Looks great! Appreciate the feedback and picture. 🙏

@mespley7

was glad to see this updated version. had a play with filament and added some bling. still only just sitting together but looking forward to getting mobile.

@Nitros

Print Profile

0.2mm layer, 2 walls, 15% infill

Cool things

@andretorre

Print Profile

0.2mm layer, 2 walls, 15% infill

ottima

(Edited)

@user_3506201660

Print Profile

0.2mm layer, 2 walls, 15% infill

Great build. The spring could be wider, it can hardly move the car when standing on wheels. Printed with esun pla+

@Bestcola

还是有点小毛病的

@Deploy

I've updated the profile as of 04/12/23 to reflect changes made to the original raw upload files. The previous assembly had loose parts and appeared to be missing components, so I made adjustments for a better fit and completeness. The axles' dimensions have been altered, I increased their diameter and slightly extended their length to accommodate the new wheel spacers. Additionally, a previously absent front axle spacer has been added, along with new spacers for all four wheels. Moreover, adjustments were made to the main drive to address a "slip" on the drive spindle by enlarging it. It seems all issues have been resolved. Please let me know if there are any problems. As no assembly instructions were provided by the original uploader, I've included plenty of pictures. Glue will be required for assembly. I suggest a dry assembly first so that you can ascertain which parts require adhesive. When assembled correctly the model runs just fine. (see GIFs)

(Edited)

GIF

@Bestcola

Replying to @Deploy :

看起来好像是对了赞

@leann.faidley

Replying to @Deploy :

Thank you for this - I was struggling with no instructions.

@9g52nyccq5

Print Profile

0.2mm layer, 2 walls, 15% infill

Cool in theory but the car does not work properly, the tension in the gears is too much for the spring to overcome. Printed with official Bambu Filament.

The designer has replied

@Deploy

It works perfectly fine. Mine has been working for weeks and still runs. Not sure what mistakes people are making. I used PLA+ Not sure if that is what has made the difference. See these GIFS