bulbasaur evolution
Print Profile(1)
Description
Project: pokemon
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x156mm in size
You may print at higher layer heights below the Min Depth of 0.4mm
The Max Depth is 2.1mm and the Actual Depth is 1.5mm
Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PLA BambuLab Basic BambuLab Green Transmission Distance: 2
This print uses 2 unique filaments
!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to BambuLab Green for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)