After my “Banana Filament Clip” and “Cucumber Filament Clip” designed specifically for Bambu Lab spools, here is the specific version for Sunlu spools. To snap it, simply place the two pins in correspondence with the holes on the edge of the spool, press the clip simultaneously on both sides and after the "click" it will remain locked in place.

When you use the spool you no longer need to remove the clip. If you use the spool on your closed AMS, the only advice is to snap the clip on the right side or the spool if you position the spool entirely on the left, because it could touch the guide located on the left on the bottom. This clip does not prevent the spool rotation and does not interfere with the filament when the spool is rolling. If you put the spool in the AMS Lite instead, you can mount the clip wherever you want!

Before choosing which version to print, measure the width of the holes on the edge of the spool: if they measure 4.5 millimeters use one of the two profiles with the blue clip, if they measure 5 millimeters use the print profile with the white clip (click here to view).

Warning: before downloading and printing SPAM profiles, check that it was actually printed by the author and that the photo used is not just a screenshot, that it is not a copy of the original profile picture or that it is not the photo stolen from those published by another user! Also check that the profile does not compromise resistance, quality and printability.