Basic card dispenser (Stackable)
Print Profile(1)
Description
The entire dispenser consists of at least two elements, a base and a tower placed on the base. The file contains two versions of the tower, depending on the needs. The first, smaller version is a tower that holds a stack of cards to a maximum height of 80 mm without the possibility of increasing the height. The oother option is a tall tower, holding a stack of cards to a maximum of 200 mm with the possibility of placing another large or small tower on it. When designing, I tried to ensure low material consumption and shorter post-printing processing, although in some places the supports have to be printed. The hardest support to remove is the support from the slot in the base, this should be done with a thin tool.
In this project, the dimensions of the card space are 65x44 mm, although by scaling the object in the X and Y axes, this can be changed.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (5)