Jack o Lantern to use with battery lights
Jack o Lantern to use with battery lights
Print Profile(1)
Description
This model is designed to fit a standard battery tea light. I did find that I needed to shave a little of the hole out, but was able to press a light in and it was so snug there was no removing it after. I purchased orange ones at Walmart and the final product looked manufactured, it was so snug of a fit.
I'll include the plain pumpkin with no face and isn't hollowed out as well if you want some standard pumpkins.
3D PRINTING SETTINGS
Layer Height - 0.15
Infill - 5%
Temp - 200 Bed 50
Print Speed 50, but I slowed support print speed to 35
Used Tree supports, touching build plate only, 0 density. They will fill up the inside. But it cleans up easy with needle nose pliers and twisting.
Also Support Z Distance I set to 0.1
The slower speed and the Support Z distance for the supports printing helps minimize how much it attaches to the print.
Comment & Rating (0)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
