Overview

Remix of the original file just adding some fun Bambu Personalization. I am new to the 3D printing community and this is my 1st 3D print submission in the community, so let me know if there is anything I can do in the future to submit cleaner files. This, like the original file uses 10x2 mm magnets which can be glued into the inserts. This is personalized for the X1C but it is easy to edit the text to match whatever model (P1P/P1S/X1C) you want this for. For color reference, I used the Silver Bambu Lab filament.

Tip for this print

You may or may not need to do this, but I learned during this print as a beginner, a brim was not enough to keep the corners from warping on the 1st layer. I raised my bed temp to the recommended 45 degree C max for the cool plate using PLA off Bambu's product page for the first layer and then 40 degrees C for the rest of the print. Also, have definitely noticed the Aux Fan causes issues as I think its cooling the print too quickly. I made sure to turn that off for the entire print. All that mixed with brim slightly less then 0.1mm (0.05-0.07mm) brim gap fixed the corners from warping for me.

Bambu Lab Cool Plate Info Below:

Reference for Table: https://us.store.bambulab.com/products/bambu-cool-plate?gclid=CjwKCAiA9ourBhAVEiwA3L5RFjIKbgwuLqmqBmCfQi5oD7rzfEm5tJUVAdyji7bYbcY-4En_Uc-_ChoC2lYQAvD_BwE

I am happy with how it turned out, but curious to know if anyone here finds ways to make the print come out better in any way so feel free to comment suggestions, as they are all appreciated. One thing I'd like to learn is how to use a different color for the recessed part of the letters without creating a 17-hour print and $8-worth of filament which made me decide to go the route I did.

Enjoy!