Android 18 Hueforge

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.12mm

The Model is 135x240mm in size

You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.8mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Matte Marine Blue Transmission Distance: 2
PLA BambuLab Basic Red Transmission Distance: 5
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 5

This print uses 5 unique filaments

Swap Instructions:
Start with Black
At layer #13 (0.6mm) swap to Marine Blue
At layer #15 (0.68mm) swap to Red
At layer #22 (0.96mm) swap to Jade White
At layer #34 (1.44mm) swap to Yellow
At layer #36 (1.52mm) swap to Jade White for the rest.

Post pictures of your Remixes!!!!