tinyrick_7

0.2mm layer, 2 walls, 15% infill

Linus Henze

cover

20231126_191632.jpg

20231126_191723.jpg

20231126_191814.jpg

20231126_191311.webp

20231126_191814.webp

20231126_191632.webp

20231126_191723.webp

plate_1.png

plate_2.png

plate_3.png

This is a UFO lamp with beam! You can put an LED tealight in it to admire this unique model! It is printed in three pieces. These include the beam, the upper part of the UFO and the lower part. These pieces are then glued together. The model is printed on a textured PEI plate.&nbsp;<ul><li>Printet on PEI plate</li><li>Without support</li><li>15% infill</li><li>0.2mm Layer height</li><li>Plate one is printet with AMS</li></ul>&nbsp;&nbsp;

Deploy

<ul><li>0.16mm Variable Layer Height on the UFO</li><li>0.16mm Layer on the Beam</li><li>3 Walls</li><li>10% Gyroid Infill</li></ul>No AMS required. I added a pause at layer 95 for a filament colour change if you want to change the top part of the UFO to a different colour of your choosing.

0.16mm Variable Layer Height, 3 walls, 10% Gyroid Infill

This is a UFO lamp with beam! You can put an LED tealight in it to admire this unique model! It is printed in three pieces. These include the beam, the upper part of the UFO and the lower part. These pieces are then glued together. The model is printed on a textured PEI plate.

UFO with beam

Global

Print Profile(2)

Description

Comment & Rating (1)

License

Related Models

UFO Frisbee!

D-Bo Hook - The Universal I Beam Hook

7L Flip-Flop Liftarm

Paranormal patrol coaster