Cute Reindeer

Prints flat without any support, you will need about 20 grams of filament and half an hour at 100% scale in one color.

You can make it multicolored by painting the antlers or adding a filament change at height.

Print Settings

Material: PLA / PETG

Layer height: 0,16mm - 0,20 mm

Nozzle diameter: 0,4mm or 0,6mm

Infill: 10-12%

Perimeters: 2

Supports: no

Orientation: flat as in original file

this is one member of my original "HomePals" collection that you can see here:

MEAF designs | Published - MakerWorld

________________________

You can find other exclusive models on this collection, and license to sell physical prints in my patreon.

https://www.patreon.com/meafdesigns

________________________