Search models, users, collections, and posts
Cable Clips
IP Report
Print Profile(1)
Original: 0.2mm layer, 60% infill, w/support.
Designer
5.9 h
4 plates
Open in Bambu Studio
Boost
502
1559
136
38
1.8 k
1.2 k
Released
Description
Cable Clips for fastening electrical cables and other cords to a wall, baseboard, skirting board etc.
Use screws that are 4-6 mm in diameter but it will most likely work with even smaller and larger screws.
The .3mf file have 4 versions:
- Cable Clip Half 8-9mm is for cables that have a diameter of 8-9mm that you want to attach as close as possible to a ceiling or a board.
- Cable Clip 8-9mm is for ordinary use.
- Cable Clip Half 9-10mm is for cables that have a diameter of 9-10mm, same use as the other.
- Cable Clip 9-10mm is for ordinary use.
NOTE: You can print this without support, it can be a hassle to remove it. The print will not be perfect but the screws will cover that part out. I recommend not using support.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (136)