user_2234920065

cover

微信图片_20241014200916.jpg

微信图片_20241016225656.jpg

plate_1.png

plate_2.png

plate_3.png

plate_4.png

plate_5.png

由于本模型为黑白2色，分成4 块打印，每块设有销钉和销孔。直接分层染色时，会将整个销孔当成一种颜色，从而导致打印时ams进行反复换料。为此，不对模型进行染色，而采取分层换色的方式解决，及直接在对应层插入更换耗材丝命令，实现1次换色即可完成打印。

As this model is printed in black and white, it is divided into four parts, each with pins and pinholes. Direct multi-color printing would treat the entire pinhole as one color, leading to repeated material changes by the AMS during printing. Therefore, instead of coloring the model, a layer-by-layer color change method is used. This involves inserting material change commands in the corresponding layers, allowing the entire print to be completed with just one color change.

0.2mm layer, 6 walls, 25% infill

带有指针的大本钟

原作者大本钟挂钟模型直径只有20厘米，挂在墙上尺寸过小。此模型将原作放大到40厘米，切成4盘，分2层进行黑白着色，每片设有销钉，以方便对接定位和胶水粘合。

The original Big Ben clock model by the author is only 20 centimeters in diameter and is too small to hang on the wall. This model enlarges the original to 40 centimeters, cuts it into 4 pieces, paints it in black and white in 2 layers, and each piece is equipped with a pin for easy docking, positioning and glue bonding.

Print Profile(1)

Description

Comment & Rating (5)

This remix is based on

License

Related Models

Big Ben with a pointer