Search models, users, collections, and posts
HUEFORGE OPTICAL EFFECT
IP Report
Print Profile(1)
0.08mm layer, 1 walls, 100% infill
Designer
3.4 h
1 plate
Open in Bambu Studio
Boost
40
67
6
2
42
22
Released
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.88mm
The Max Depth is 2.6mm and the Actual Depth is 2.7mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu White Transmission Distance: 5
This print uses 2 unique filaments
Swap Instructions:
Start with Black
At layer #14 (1.2mm) swap to White for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivatives
Comment & Rating (6)