Bottle Drying Rack
Print Profile(2)
Description
Membership
Do you want to sell 3D prints of this model? With a small expense you can earn big. Join the Membership program and choose the license that best suits your business!
It is not very easy to dry the aluminum bottles after washing them: if you simply put them away with the cap open there will always be a few drops inside and if you stick a dish towel in there this risks remaining inside. The ideal is to place them upside down so that the drops come out, but there were two problems: it gets wet everywhere and they fall easily.
So I designed a very simple object to put them in: it has a small tray to collect the water and at the same time prevents the bottle from falling. In the printing profile you will find a plate with the tray for a single water bottle, and a plate with a double tray for two water bottles: this also has a cover that I printed separately in another colour; it is not mandatory to print it because It has no function other than to improve aesthetics, especially when printed on the textured PEI plate.
The design and printing profile have been designed to make it watertight. If the internal diameter of the hole on the bottle is less than 29 mm, scale down the model.
If you have a baby bottle or a very wide-necked bottle, you can try the version in the photo below:
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (32)