Silicone Mold Box - Configurable - Free 3D Print Model

Search models, users, collections, and posts

ChrisCox

Hobby & DIY>Other Hobby & DIY

IP Report

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

Reduced Material 0.28mm layer, 2 walls, 15% infill

Designer

3.8 h

1 plate

5.0(37)

Baseline version 0.2mm layer, 2 walls, 15% infill

Designer

7.2 h

1 plate

4.9(8)

Open in Bambu Studio

Boost

878

2469

1.3 k

605

Released

Description

A set of corner and side designs (OpenSCAD files and STLs) for silicone mold boxes: making your own silicone molds. Both OpenSCAD files are customizable.
The default design is compatible with the hard plastic mold boxes you can find everywhere. STLs are included that are compatible with the cheaper, soft silicone mold boxes. And I added some reduced material STL versions that minimize filament used (and print time).
This prints best on a smooth plate, because you want tape or hot glue to adhere well to the bottom of the box.
Do not print with a resin printer: most resins are not compatible with 2 part silicone and will inhibit curing.

The binder clips are small (about 2cm, 0.75 inch), and some medium (3cm, about 1.25 inch). You can find them at any office supply, or online retailer.

I really would like more feedback from folks printing this - how well is it working for you?