Ultimate Ice Scraper
Copyright Claim
Ultimate Ice Scraper
Boost
175
275
170
Print Profile(7)
0.2mm layer, 4 walls, 10% Gyroid infill
Designer
1.4 h
1 plate
0.24mm layer, 4 walls, 15% infill
1.2 h
1 plate
![[PETG | 120%] 0.16mm layer, 4 walls, 20% infill](https://makerworld.bblmw.com/makerworld/model/US6ff5612f19b94e/design/2023-12-05_d9abb99e4d5198.jpeg?x-oss-process=image/resize,w_100/format,webp)
[PETG | 120%] 0.16mm layer, 4 walls, 20% infill
2.6 h
1 plate
ABS - 120%, 0.2mm layer, 4 walls, 25% infill
1.8 h
1 plate
Click to see more
Open in Bambu Studio
Boost
175
275
170
6
818
972
Released
Description
It's -8℃ currently where I am. I needed a new ice scraper.
It's strong and I've gone through several iterations to get it to feel comfortable in the hand.
There are ribs along the handle for better grip as well as a large indentation at the top to help push when hitting the stubborn ice patches on the windscreen.
This one can be printed in PLA, but would also be great in ABS/ASA or PETG for durability in cold weather and under UV from the sun.
I would suggest at least 4 wall layers, o.2mm wall heights, at least 15% infill.
Print flat without any support. Brim might be useful to help with warping, especially when printing in ABS or ASA.
Stay warm out there!
Comment & Rating (170)
All
Print Profile
0.24mm layer, 4 walls, 15% infill
Haven’t field tested it yet, but like the feel of it!
1
Reply
pmppppmpppmpmpmpmpmpmppmpmpmpmppmpppmpppmpmpmpmpmpmpmpmpmpmpmpmpmmpm
0
Reply
pmpmpmpmpmpmpmpmpmpmpmpmpmpmpppppmpmmpmpppmpmpmpmpmpmppmmppmpmppppmppmpmpppmppmpppmpmpmpmppmpmppppmpppppmppmppmpmpmpmpppmpmpmpmpmpmpmpmpmpppmppmppmppmmmmppppmppmpppmpmppmpmpmpmpppmmppmpmpmppmpppmpmpmpmpmpmpppmppmpmpppppppppmppmpmppppppmppmppppmpppmppmppmpmpmppmpmpmpmpmppmpppmppmppppmpmpmpmpmpmpmppmppppmppmpmppmppmpmpmpmppppppmpppppppppmpmppmpppmpmpmppmpmpm
0
Reply
pmppmpmppmpmpmpppmpmmpmp
0
Reply
Print Profile
0.2mm layer, 4 walls, 10% Gyroid infill
So far so good.
1
Reply
Boosted
Just tested the ice scraper, it works, thank you very much :)
1
Reply
Print Profile
0.2mm layer, 4 walls, 10% Gyroid infill
works great. I should have used more infill
0
Reply
Print Profile
0.2mm layer, 4 walls, 10% Gyroid infill
great one
0
Reply
Print Profile
0.2mm layer, 4 walls, 10% Gyroid infill
super
(Edited)
0
Reply
Print Profile
0.2mm layer, 4 walls, 10% Gyroid infill
Great
0
Reply
Print Profile
0.2mm layer, 4 walls, 10% Gyroid infill
good quality print
0
Reply
Print Profile
0.24mm layer, 4 walls, 15% infill
Nice print in PETG. Very comfortable handle.
0
Reply
Print Profile
0.2mm layer, 4 walls, 10% Gyroid infill
Strong!
(Edited)
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-NoncommercialRemixes (2)
Related Models
© 2024 MakerWorld