Simple and robust ice scraper

Copyright Claim

Simple and robust ice scraper

Boost
5
6
5

Print Profile(1)

All
P1S
P1P
X1
X1 Carbon
X1E
A1

0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
Designer
52 min
1 plate
4.0(3)

Boost
5
6
5
0
26
28
Released

Description

3 in 1 simple and robust ice scraper. Print in place.

  • Ice removal from your car windscreen
  • Frost buildup removal
  • Cleaning windscreen wipers

Smooth corners help protect the rubber window seals. The angled shape of the ice scraper contributes to efficient clearing of frost and ice, whilst allowing for easy access to narrow corners.


Dimensions: 15.5cm Longest Edge x 11.5cm Wide. Fully scalable.

The hole can be used for better grip and strapping fabric to protect your hands from cold, as shown in one of the screenshots.

I will upload native STEP file if there will be demand for it, so you can tweak it any way you want. DM me if you have any questions.

Recommended print settings

  • Nozzle: 0.4
  • Layer height: 0.2

 

Material usage and printing time

15% infill will use approximately 12 meters of filament and will take around 50 minutes.

100% infill will use approximately 32 meters of filament and will take around 1,5 - 2 hours depending on your printer.

Inspired by Swedish ice scraper

Comment & Rating (5)

Please fill in your opinion
(0/5000)

Your estimate is not matching up with my slicing at 100% scale, 99% infill:
The designer has replied
1
Reply
You are right. Thank you for correcting me. I didn't update print time after changing to 100% infill. Just printed with 30% infill and it seems quite strong. Will try it out tomorrow morning, if the weather gives me the opportunity.
(Edited)
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
No more