Magnetic Filament Label

Description

Magnetic filament labels designed for Utopia Cereal Containers and for the AMS (or any other flat surface)

check out my other related models: 

• Filament Dry Box with Rollers
• Filament Dry Box (Cereal Container with Indents)

Magnets

I am using 8mm x 2mm (1.65mm) magnets that I already had. If you have different magnet, I can make a variant for you
Example: https://www.amazon.com/TRYMAG-Magnets-Neodymium-Whiteboard-Hobbies/dp/B0CDH2HCV9 

(the magnets should fit with friction, but if needed use a little bit of glue)

I have also uploaded a design for 10mm x 2mm magnets. Comment if you'd like a different size supported 

Labels

Labels printed using the NIIMBOT B18 printer and 14mmx50mm labels

Assembly

The part labeled curved is to be attached to a cereal container. The other part can be used either as the base or the label, just make sure you keep the magnet polarity consistent. The flat bases can either have the same polarity as the tags and you can hide the magnets, or you can flip the polarity and have the magnets face outward.

I used 3M tape for adhesion, but any double-sided tape should work fine. 
 

For consistent spacing on the cereal containers, I used one of the labels to space it down (see one of the photos)