Good vibes only - large standing sign


Print Profile(2)

0.2mm layer, 3 walls, 15% infill - Multicolor
0.2mm layer, 3 walls, 15% infill - Multicolor
Designer
X1 Carbon, P1S, P1P, X1, X1E, A16.5 h
4.9
75% scale for A1 mini  0.2mm layer, 3 walls, 15% infill
75% scale for A1 mini 0.2mm layer, 3 walls, 15% infill
A1 mini, P1S, P1P, X1, X1 Carbon, X1E, A14.6 h
5.0

408
599
134
757
483
Released
Copyright Claim
Model
Comment & Rating
Remixes
Related Models

Model

A large, stylish desk or shelf ornament filled with good vibes only. I designed this sign in Figma and Fusion360 to learn multi-color workflows, and bring good vibes to my workspace.

 

The finished print can stand on its own and looks fantastic as a multi-color print.

 

The version shown in the photo used:

  • Bambu PLA Basic Red
  • Polymaker PolyLite PLA Yellow
  • Bambu PLA Basic Blue
  • Bambua PLA Matte White

 

For personal use only. Not for commercial use.


License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Comment & Rating (134)

0/5000

The print profile is no longer public

Very tastefull (Edited)

The designer has replied
3
Reply

Thats perfect next to the nintendo! ;)(Edited)

1
Reply

@3DJupp what font did you use?

0
Reply
Model Comment

Would make an awesome LED Lightbox if you print with 0% infill! You can flip it on its face, and set 0 top layers for the main body, then print the bottom 10 layers for the back. (Edited)

3
Reply

I was thinking the same. I tried clicking vase mode, but bambu studio said that it wouldn't do vase mode with multi material. I wonder how we could make this happen???

0
Reply

@M of WI Flip it on its face, do 0% infill and 0 top layers.

0
Reply

@maximit The slicer recognizes the overhang is their a slicer setting to allow it, or do we need the model to filet a radius?

0
Reply
Model Comment

The model design is really cool, but maybe it could use a bit of work. Sadly you can see through the white layer quite a bit, looks like it could've used a bit more filament here..which is rough as it uses so much filament for the first layer. Under certain lightings you can see the infill pattern behind the letters and it's easily noticeable. Seeing the infill design through the whole object after almost 400 grams of filament is less than ideal. I might add a bit of white paint to fix this. I added a highly edited photo to show how you can see the infill pattern through the walls. Going to give this 5 stars, as I'm new to 3D printing and maybe this is due to the filament, color combination or both. Definitely something to consider for this big boy. Thank you to the creator for making this public, it's a delightful, captivating and stylish model!(Edited)

The designer has replied
0
Reply
Model Uploader

Firstly - welcome to the 3d printing gang! And welcome to the rabbit hole :P. Appreciate the feedback. When it comes to seeing infill pattern through outer layers, it generally means you'll need to increase the number of top or bottom layers, or number of walls. This can vary by filament - some allow more light to pass through, or interact differently with the infill when placed over the top. I've found *some* light filaments are more susceptible to the infill issue.

0
Reply

@TrendtB Thank you! I do love this model, definitely gonna add a bit of paint. I can see there is a lot to know. How would you fix this issue for this model? I used all bambu filament. I might scale it down a bit and try again for smaller version. Also, I'm not sure how to increase the number of layers.

0
Reply
0.2mm layer, 3 walls, 15% infill - Multicolor

One of the coolest things I’ve printed. I LOVE it! Thank you for sharing this wonderful design!

The designer has replied
1
Reply

Aw thankyou!(Edited)

1
Reply
0.2mm layer, 3 walls, 15% infill - Multicolor

love this print - it turned out so well. I love looking at it - so groovy!

The designer has replied
1
Reply

Glad you like it!

0
Reply
0.2mm layer, 3 walls, 15% infill - Multicolor

This printed excellently. The horizontal blue, Bambu Silk, is the only layer that’s easily visible on the printing pattern. I really love this sign. I want more like it.

The designer has replied
1
Reply

Thanks for your kind words, I'll have to look into making more designs 🙂

0
Reply
Model Comment

thank you so much.

The designer has replied
1
Reply
Model Uploader

You're most welcome! Enjoy!

1
Reply
Model Comment

Added a fifth color, cool print.

The designer has replied
0
Reply
Model Uploader

Love it!

0
Reply
0.2mm layer, 3 walls, 15% infill - Multicolor

I printed directly from the profile using Bambi filament. third time it’s failed like this. fix your print

The designer has replied
0
Reply

Hey mate, sorry this has happened to you. This issue hasn't popped up for anyone else, perhaps there's something else causing this problem? Without clearer pictures it's hard to tell, but it looks like your nozzle might be hitting your infill? Have you calibrated your filament?(Edited)

1
Reply
0.2mm layer, 3 walls, 15% infill - Multicolor

No issues making several of these signs so far. really cool design.

1
Reply

Remixes (0)

There are no remixes yet