Original art created by us, then we used Hueforge to create this 200x200 piece.

Please share your prints

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Matte Charcoal
PLA BambuLab Basic Orange
PLA BambuLab Basic Blue Gray
PLA BambuLab Basic Jade White

Swap Instructions:
Start with Charcoal
At layer #5 (0.48mm) swap to Orange
At layer #10 (0.88mm) swap to Blue Gray
At layer #14 (1.2mm) swap to Jade White for the rest.