Very sturdy, carries soap or multiple shampoo bottles.

Unlike my other designs, this dish is fixed on the back.
Fits 18, 20, 22 and 25mm shower rails.
Versions for left and right mounting available.

Easy to print and easy to mount.

There is the option of screwing in a hook for washcloths or other utensils on the underside of the box.

Note:

If none of the download options fit your shower rail, you can scale all parts of the next suitable variant in the slicer. The scaling percentage is calculated as follows:

[desired diameter] / [diameter of used download option] * 100

Assembly:

Please follow the scheme above (last picture).

The hook attaches with a screw thread, and depending on your print configuration, once tightened, it may not line up as properly as in my photos. This can be corrected in a number of ways:

• if the hook rotates too far, it can be fixed in the right position with some glue in the thread,
• if the hook does not rotate far enough, sanding down a few hundredths of a millimeter at the end of the screw may help,
• another alternative would be (when printing the hook) to vary the "X-Y Contour Compensation" parameter in Bambu Studio by a few hundredths of a millimeter for a tighter or wider fit.