cutter

this is an small cutting tool for cutting different small things like plasters, tape, paper etc. it is so small that you can put it in your backpack when you make an trip, etc.

To build the cutter you only need a piece of wire, and one segment of an cutter knife (a bit of tape is needed to make the blade a bit thicker).

When you removed the supports of the print, you can wrap a little bit of tape around the blade and decide, if you want the blde a bit longer or shorter. If you put the 3d printed parts then together, it should move freely. The last step is to put the wire thru the two holes and your done building the cutter. If you want to change the blade you only have to remove the wire.

The blade is constructed in such a way that you normaly can't cut yourself.