qulix

cover

plate_1.png

SpaceBison

IMG_20241122_121506.jpg

IMG_20241122_122129.jpg

No supports. The round hole is a bit tight and needed some treatment with a 5mm drill to let the screw pass through. Other than that, it printed really nice. I really like how compact the smallest ones are.I heated the screw heads with a lighter before insertion to make they stick and don't come out.

0.2mm layer, 3 walls, 25% infill

IMG_20241123_104128.jpg

Printed with PETG. I was trying to get the print as transparent as possible, it didn't really work, but I like the result either way. There was no need to widen the hole, I pulled the screw in using a nut without heating and it sits nicely.

0.1mm layer, 0 walls, 100% infill

knartz

IMG_0880.jpeg

IMG_0882.jpeg

vertically scaled to 55.4mm to allow screwing under/besides the camera. Its a bit hard to keep the screw centered while inserting… I used a small screwdriver to recenter the screw from below, while pushing with a bigger screw driver from above.

Long Version - 0.2mm layer, 3 walls, 25% infill PLA

GoPro Knob M5 hexagon bolt or screw

ASIA

Print Profile(3)

Description

Comment & Rating (65)

License

Related Models