Snake quetzalcoatl flex by steganos888

steganos888

Toys & Games>Other Toys & Games

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

0.16mm layer, 2 walls, 15% infill

Designer

4.8 h

1 plate

4.4(16)

75% Scale, 0.16mm layer, 2 walls, 15% infill

2.7 h

1 plate

5.0(2)

Open in Bambu Studio

Boost

Released

Description

Snake quetzalcoatl aztec

Comment & Rating (18)

@Noodle_Doodler

Print Profile

0.16mm layer, 2 walls, 15% infill

Printed perfect on X1C without a brim as long as you go slow or silent on first few passes and crank up to normal after a decent base is made. Absolutely an easy and wonderful Quetzalcoatl! Used Bambu PLA

@Saint.Saul

Print Profile

75% Scale, 0.16mm layer, 2 walls, 15% infill

second print on my p1p went amazing

@ewittenstein

Print Profile

0.16mm layer, 2 walls, 15% infill

Printed it scaled down a bit but overall great model!

@user_1182337189

Print Profile

0.16mm layer, 2 walls, 15% infill

@finnwii3d

Print Profile

0.16mm layer, 2 walls, 15% infill

@EmmaRose

Print Profile

0.16mm layer, 2 walls, 15% infill

(Edited)

Bed Adhesion Issue:Editing my review of this file. Tried three times to print this with PLA and had absolutely no luck with it, the object would not stay put on the plate and after about twenty minutes would fail. I tried making so many adjustments to improve my chance of success and it never worked. I gave up on trying to print this, until last night. I recently acquired a roll of Translucent Pink 95A TPU, and decided on a whim to try this print out. To my surprise, it worked really well!