Search models, users, collections, and posts
Storage box v2
IP Report
Print Profile(2)
Small: 0.28mm layer height, 0.53 line width
Designer
2 h
1 plate
Default: 0.28mm layer height, 0.6 line width
Designer
3.3 h
1 plate
Open in Bambu Studio
Boost
682
1964
386
180
3 k
1.9 k
Released
Description
New version of Storage box!
Better model slicing, thicker walls, improved corners, overhangs and handles.
Can be print faster than the previous model!
Visual comparison:
Two print profiles:
- Default (220x180x80)
- Wall thickness: 2.4 mm
- Line width: 0.6
- Walls: 4 (in slicer set to 3 to overlap the lower layers with the walls of the box)
- Line height: 0.28
- Seem position: Back
- Fan speed: same for every layer (I set 50%)
- Speed: 120mm/s (can be set higher) - Small (176x144x64) for a1 mini
- Wall thickness: 2.12 mm
- Line width: 0.53
- Walls: 4 (in slicer set to 3 to overlap the lower layers with the walls of the box)
- Line height: 0.28
- Seem position: Back
- Fan speed: same for every layer (I set 50%)
- Speed: 120mm/s (can be set higher)
Feel free to adjust printing speed (I printed with 120mm/s PLA and PETG) and resize the box as you wish!
Boost Me (for free)
If you like this model you can boost me for free!
In addition I released 2 lids for this storage box to cover or stack boxes
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (386)