Customizable Wall Mounted Spice Rack.

All parts are pre-supported and print without additional supports. The pre-supported tabs under the mounting flanges are to be broken off the main model before use.

Install Guide:

1. Break off any supports from the spice holders.
2. Slot the top of the Spice Holder Flanges into the Wall Mount plate until they are hooked in.
3. Firmly press the bottom of the Flanges through the Wall Mount plate until they snap through.
4. Pull down on the Spice Holder to make sure it's firmly seated in the Mount Plate.
5. Repeat for any additional parts.
6. Attach 3M Command Strips to the raised areas on the Wall side of the Mount Plate.
7. Stick the wall plate to the wall and press firmly to ensure it's adhered to the wall.
8. Enjoy!