Spiderman Bust Büste
Remixed by
Copyright Claim
Spiderman Bust Büste
Remixed by
Boost
112
148
52
Print Profile(4)
0.12mm layer, 2 walls, 0% infill - Model Height 200mm
Designer
6.6 h
1 plate
0.12mm layer, 2 walls, 0% infill - 75% Height 150mm
Designer
3.8 h
1 plate
![[70% Scale]: 0.2mm layer, 2 walls, 0% infill](https://makerworld.bblmw.com/makerworld/model/USca3264d64ca5/design/2023-12-22_30b6f308c21d6.jpg?x-oss-process=image/resize,w_100/format,webp)
[70% Scale]: 0.2mm layer, 2 walls, 0% infill
3.3 h
1 plate
![[30% scale] with 0.4 scaled to 0.3 Nozzle Trick - 0.12mm layer, 3 walls, 24% infill](https://makerworld.bblmw.com/makerworld/model/USca3264d64ca5/design/2024-01-17_e4db093a6bff.jpg?x-oss-process=image/resize,w_100/format,webp)
[30% scale] with 0.4 scaled to 0.3 Nozzle Trick - 0.12mm layer, 3 walls, 24% infill
1.1 h
1 plate
Boost
112
148
52
6
472
250
Released
Description
A Bust of Spiderman - you can print it hollow
i closed the base on all sides !
Printer : Artillery Sidewinder X2 There is a REMIX : https://makerworld.com/en/models/239879
layer height : 0,1 line width : 0,6
no support ; no infill ; print time ~ 22 h
Sunlu Silk Blue PLA
The Rock : https://makerworld.com/en/models/463775#profileId-372394
Thanos : https://makerworld.com/en/models/449172#profileId-355958
My Models : https://www.printables.com/de/@CB_384764/models
MakerWorld : https://makerworld.com/en/@sweb3791
Comment & Rating (52)
All
Boosted
Print Profile
0.12mm layer, 2 walls, 0% infill - Model Height 200mm
Amazing !!!! like spider man !!!
The designer has replied
0
Reply
Wow so cool !!!
0
Reply
Print Profile
[30% scale] with 0.4 scaled to 0.3 Nozzle Trick - 0.12mm layer, 3 walls, 24% infill
I didn't care about the model but more about these specific print-settings which can yield to finer horizontal details by reducing the line width. Very pleased with the results so far!
1
Reply
Print Profile
[30% scale] with 0.4 scaled to 0.3 Nozzle Trick - 0.12mm layer, 3 walls, 24% infill
Easy print very good profile. Thanks
0
Reply
Print Profile
[30% scale] with 0.4 scaled to 0.3 Nozzle Trick - 0.12mm layer, 3 walls, 24% infill
Nice and Quick :)
0
Reply
Print Profile
[70% Scale]: 0.2mm layer, 2 walls, 0% infill
i make a 3 colors print profilo, not sure how tò share... anyway wonderful model Just a bit low poly. took me 20 hrs tò colorize
0
Reply
Boosted
Print Profile
[30% scale] with 0.4 scaled to 0.3 Nozzle Trick - 0.12mm layer, 3 walls, 24% infill
magnifique merci !!
(Edited)
0
Reply
Print Profile
[70% Scale]: 0.2mm layer, 2 walls, 0% infill
perfect. no problems
0
Reply
Print Profile
[70% Scale]: 0.2mm layer, 2 walls, 0% infill
sehr schöner Druck
0
Reply
Print Profile
[70% Scale]: 0.2mm layer, 2 walls, 0% infill
printed great!
0
Reply
Added my 30% scale print profile with extrusion width modified to achieve 0.3 diameter details
0
Reply
This remix is based on
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRemixes (2)
Related Models
© 2024 MakerWorld