Use my print profile for best results, I cannot guarantee print profiles by others.
Here are 18 different Christmas ornaments that print really fast: under 2 hours for each plate of 9 ornaments. Only 3 filament swaps total per print. Two different build plates.
The 3mf file has all the filament changes built in.
Print at 100% infill with a layer height of 0.2mm with a base layer of 0.2mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Matte Scarlet Red Transmission Distance: 2
PLA BambuLab Basic BambuLab Green Transmission Distance: 8
PLA BambuLab Matte Ivory White Transmission Distance: 4
Swap Instructions:
Start with Charcoal
At layer #7 (1.4mm) swap to Scarlet Red
At layer #12 (2.4mm) swap to BambuLab Green
At layer #19 (3.8mm) swap to Ivory White for the rest.