Jinx Flare Hueforge
Print Profile(2)
Description
Boost Me (for free)
If you like this, please check out my other Arcane HueForges or considering boosting me :)
This is a hueforge of one of the season 1 posters for Arcane.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 173.35x250mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.3
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Cyan Transmission Distance: 4
PLA+ Sunlu White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #6 (0.72mm) swap to Red
At layer #11 (1.12mm) swap to Sky Blue
At layer #16 (1.68mm) swap to White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (61)