原作的很薄很容易损坏,所以做了个更厚实的,封住了底面避免细碎掉落,并且填补了到机械机构的缝隙避免废料飞出。
The original was thin and easily damaged, so a thicker one was made, sealing the bottom to prevent fine pieces from falling, and filling in the gaps to the mechanical mechanism to prevent waste from flying out.
这两种配置是两种不同的型号,请注意区别,一个入口有斜面,一个没有。
The 2 configurations are 2 different models Please note the distinction, one entrance has a bevel, one does not.
更新一个新配置(2024/2/1)
优化入口处,变成斜面,降低为2层墙,15%填充,可以更快的打印
optimize the entrance,modified to bevel,2 walls, 15% infill,faster printing