Harley Eagle Lightbox
Copyright Claim
Harley Eagle Lightbox
Boost
49
95
19
Print Profile(1)
0.16mm layer, 4 walls, 20% infill
Designer
7.6 h
2 plates
Open in Bambu Studio
Boost
49
95
19
2
191
135
Released
Description
Sharing my love of Harleys with this lightbox I designed in Fusion360. Perfect for the man-cave or any other place a biker-friendly person might want to hang it. Has port at bottom for a cable if you're wanting to use LEDs.
Comment & Rating (19)
All
Print Profile
0.16mm layer, 4 walls, 20% infill
Very nice design and overall good quality. The only issue is that there are several lines that are not closed (some black and yellow parts). As a result light is bleeding through. That's a cosmetic issue when you use it as a lamp. For the use of the Print as a decoration object without light it will work.
The designer has replied
0
Reply
you have to turn your overlap up to close those. I designed it with zero clearance, so your layer lines are the only handicap (as with a lot of other lightboxes with fine detail.) turn your overlap to 30% and those holes close up.
(Edited)1
Reply
Print Profile
0.16mm layer, 4 walls, 20% infill
Nice model, but some design flaws as stated in the comments.
0
Reply
Print Profile
0.16mm layer, 4 walls, 20% infill
Sehr schönes Model und sehr passgenau!
Nicht alle schwarzen Linien sind lichtundurchlässig, da muss ich mal sehen, wie ich es besser hinbekomme. Grundsätzlich ist es aber gut und kann als Lampe verwendet werden.
0
Reply
Nice model with "flaws". It would have been much better to design it the other way around, the walls on the bottom part. With that I could have easily added an USB-C Port, like on this remix https://makerworld.com/en/models/426260#profileId-330055.
Also the logo wouldn't be compromized by bumping into it all the time while adding the LED strip and wiring all up.
To top it off, there wouldn't be the need to glue it closed, as the logo part would be light enough to just pressfit it into the frame.
The designer has replied
0
Reply
Thats a great idea that will look forward to implementing in the future. As of now, I get a good deal on Amazon for the strips and USB extensions that are cheap. I like to design for a mass produced item.
0
Reply
Print Profile
0.16mm layer, 4 walls, 20% infill
Printed great! Need a stand to use on shelf.
0
Reply
Bonjour,
Très belle création, vous est-il possible de réaliser ce même modèle en version dessous de verre en diamètre Ø100 environ .
Par avance, merci
Dans l'attente de votre retour
0
Reply
Print Profile
0.16mm layer, 4 walls, 20% infill
Great work on this box, very happy 😃
0
Reply
Print Profile
0.16mm layer, 4 walls, 20% infill
dis be nice
0
Reply
Boosted
Print Profile
0.16mm layer, 4 walls, 20% infill
0
Reply
Print Profile
0.16mm layer, 4 walls, 20% infill
0
Reply
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Related Models
© 2024 MakerWorld