Print Profile(0)
Description
Project: Hulk.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x300mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3mm and the Actual Depth is 3.1mm
Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PLA BambuLab Basic Green Transmission Distance: 2
PLA BambuLab Basic BambuLab Green Transmission Distance: 2
PETG JAYO White Transmission Distance: 6
This print uses 4 unique filaments
!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Green
At layer #13 (1.12mm) swap to BambuLab Green
At layer #24 (2mm) swap to White for the rest.
License
Comment & Rating (4)