Ornament for light chain

I created ornaments with family photos (lithophane) that attach to a light chain. I planned to add a few to the light chain each year.

Ornament with an iced tea light candle

I also created a second model so that the ornaments could be used on their own without the light chain. A 35mm or 38mm diameter led tea light candle will provide the light for the ornament.

!! I haven't had a chance to print the candle version yet. I cannot guarantee the quality of the model. I will try to provide photos or improvements as soon as possible (as soon as I am released from the hospital).

Litophane Maker url:

https://lithophanemaker.com/Lithophane%20Tag.html

Printing settings

The ornament itself is printed without supports. Since the lithophane is printed in portrait, you will have to secure it with supports. The lithophane has a diameter of 60mm, but it is better to use 59,6mm values.

Ornaments:

• material: PLA/PETG
• wall-count: 2
• infill: 10%
• layer-height: 0.15

Litophane:

• material: WHITE PLA
• infill: 99%
• layer-height: 0.12

Instructions for assembling the ornament and preparing lithophane photos.

Ornament for light chain	First, insert the lithophane inside the ornament. Insert perpendicularly - the ornament will spread a little - use a little force   Step 1: Insert the lithophane inside the ornament into the groove Step 2: Insert the second lithophane into the groove on the outside of the ornament Step 3: Insert the light chain bulb into the hole in the ornament. Place the fuse on the light chain wire and insert it into the hole. Pull the light chain back a little.
First, insert the lithophane inside the ornament. Insert perpendicularly - the ornament will spread a little - use a little force   Step 1: Insert the lithophane inside the ornament into the groove Step 2: Insert the hook holder from the inside Step 3: Insert the hook Step 4: Light and insert the iced tea light Step 5: Insert the second lithophane into the groove on the outside of the ornament
	Circular Lithophane Maker is used to create lithophane https://lithophanemaker.com/Lithophane%20Tag.htm For greater lithophane strength, set at least a 2mm frame. Insert a photo and set values similar to the picture... Litophane is printed vertically