Small Spool

I needed a small spool to store some loose 1mm venetian blind cord so I made this model.

Some quick information about the model:

• It is on the plate at 150% of its normal size (40mm) so it is about 60mm across. It can be easily resized to suit your needs.
• It comes in two parts (top and bottom). You press it together once printed and it should be quite tight. You might need to slightly adjust its size depending on your printer calibration and tolerances.
• It has a thick top and bottom shell as I wanted it to be strong but you can adjust those settings as desired.
• The bottom spool part has a small hole for attaching the item you wind onto it. The hole can be resized, moved or removed as it is a negative cylinder part.

You do not require supports or a brim.

Printing was done with Bambu Lab Basic PLA Black.