Eule Hueforge

Hello 3D printing enthusiasts! 🦉

I am excited to offer you this beautiful owl project! 🖨️ You can print this elegant owl, which looks particularly noble thanks to the use of SILK WHITE.

Printing Recommendations:

• Filament: I recommend SILK WHITE for an especially smooth and luxurious finish.
• Infill Density: 100% Infill for a stable and high-quality structure.
• Layer Height: 0.08 mm for detailed results, with a base layer thickness of 0.16 mm.

Filaments Used:

• PLA BambuLab Basic Black: Transmission Distance 0.6
• PLA BambuLab Basic Blue Gray: Transmission Distance 3
• PLA BambuLab Basic Gray: Transmission Distance 2
• PLA BambuLab Basic Jade White: Transmission Distance 5

Filament Change Instructions:

1. Start the print with Black.
2. Switch to Blue Gray at Layer #9 (0.8 mm).
3. At Layer #15 (1.28 mm), switch to Gray.
4. Finally, from Layer #19 (1.6 mm), switch to Jade White and use this filament until the end.

Have fun printing and I look forward to seeing your results! ✨

I wish you much joy with printing and crafting! If you have questions or want to share your result, I look forward to your feedback! 
Happy Printing!