Print Profile(1)
Description
Boost Me (for free)
Spooky Haunted House Lantern for Halloween.
Add an electric tea candle and illuminate the lantern for added spookiness! (Do not use a real candle)
Printed with Bambu Matte Black PLA and Bambu Orange Basic PLA.
The model base is 100x100mm, and the roof is 131x131mm.
There are two variants, with and without the hanging chain.
For a one time support you can buy me a coffee to keep me caffeinated for future projects here:
https://buymeacoffee.com/rleach
Model Instructions:
- This print doesn't require any supports and can be fully printed in place.
- The chain is print in place and two lengths have been added.
- More chains can be added by moving the single link 2.2mm horizontally and 15mm vertically.
- Do not use any support
- Print with 15% infill.
- The Lantern Top and Bottom will mechanically snap together.
- No need for any glue.
- Jack o Lantern faces slide into slots, print 1 face and 3 sides.
- Pin Holder Assembly
- Slide Pin Holder onto chain.
- Slide Pin Holder and chain onto the pin slot on roof
- Push pin through and it will lock mechanically
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)