CM #2
Print Profile(1)
Description
rint at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA+ Numakers Chocolate Brown Transmission Distance: 0.4
PLA+ Numakers Rust Copper Transmission Distance: 2.1
PLA+ Numakers Cool White Transmission Distance: 1.8
PLA+ Numakers Lemon Yellow Transmission Distance: 5.7
PLA+ Numakers Bahama Yellow Transmission Distance: 3.6
PLA+ Numakers Outrageous Orange Transmission Distance: 4.7
This print uses 6 unique filaments
Swap Instructions:
Start with Chocolate Brown
At layer #10 (0.52mm) swap to Rust Copper
At layer #20 (0.92mm) swap to Cool White
At layer #25 (1.12mm) swap to Lemon Yellow
At layer #29 (1.28mm) swap to Chocolate Brown
At layer #35 (1.52mm) swap to Rust Copper
At layer #45 (1.92mm) swap to Bahama Yellow
At layer #48 (2.04mm) swap to Outrageous Orange
At layer #49 (2.08mm) swap to Cool White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)