Search models, users, collections, and posts
Eagles Hueforge
IP Report
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
4.5 h
1 plate
Open in Bambu Studio
Boost
53
143
14
7
98
66
Released
Description
Project: Eagles.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.64mm
The Max Depth is 2.2mm and the Actual Depth is 1.9mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA Paramount 3D Mid Century Teal Transmission Distance: 2
PLA Overture Light Gray Transmission Distance: 0.7
PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Mid Century Teal
At layer #14 (1.2mm) swap to Light Gray
At layer #17 (1.44mm) swap to White for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (14)