Master Roshi

Modification History

• 20241021 Added negative parts to the printing configuration, adjusted the size of the hole on the right arm for easy connection

===============================================================================

Master Roshi model is from Akira Toriyama's Dragon Ball anime, the first episode of Master Roshi's first appearance

• Size

  The height of the assembled model is 80mm, which is easy to handle and play with, and is also a suitable size as a desktop display

• Disassembly

  The shell, limbs, head, and body have been split, and can be printed separately; they can be directly connected after printing, no glue is required (if the limbs are damaged, they can be printed separately and replaced); the shell part is not connected to the body to avoid damaging the back of the figure, there is a wire hole inside the shell, use a rubber band to pass through it, and then bind it to the arm, adding playability

  Note: The arm connection holes may be a bit tight, you may need to drill them or shave the arm joint slightly

• Coloring

  I have put up a picture of Master Roshi's appearance, which can be used as a reference for coloring; this model size is relatively easy for hand-disabled people to color, it is not eye-straining; this is what I painted, I am a pure amateur

  

• Other

  The original OBJ file of the model has been uploaded, if you have the ability or are not satisfied with the existing posture, you can modify it

Finally, creation is not easy, I hope everyone will like and collect it, and print it actively, if you encounter any problems, please leave a message