"Glowing" - Jack Skellington by Madness3D

Madness3D

Art>2D Art

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

200x200mm - 0.08mm layer, 2 walls, 100% infill

Designer

2.8 h

1 plate

5.0(15)

238x238 Max Size, Remove your back prime line for X1 series

3.6 h

1 plate

4.5(2)

Boost

127

Released

Description

Optimized for 3D printing with a amazing depth of field.

The Glowing series is optimized with 2 filaments for the most popping effect when matched with glow in the dark filament.

It can be printed with either glow in the dark filament or with plain bambu lab green filament (without the glow in the dark effect)..

There are 2 print profiles available.

200x200 is optimized for x1c, p1s, p1p

150x150 is optimized for A1 mini.

Pictures can be printed with out AMS by following the print instructions below.

Art generated with midjourney and optimized for 3D printing with Hueforge.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 1.7
PLA BambuLab Basic BambuLab Green Transmission Distance: 14

Swap Instructions:
Start with Charcoal
At layer #8 (0.72mm) swap to BambuLab Green for the rest.

christmas decorations

Comment & Rating (21)

@ebjspecials

Print Profile

200x200mm - 0.08mm layer, 2 walls, 100% infill

150x150. Nice.

@snjames316

Print Profile

200x200mm - 0.08mm layer, 2 walls, 100% infill

Came out great, super cool print. printed one at normal size and then I increased the Size to the maximum plate size (minus the exclusion zone). to do this I removed the prime line that the x1 does right before starting the print by commenting it out of the Gcode and saved the printer profile as "no prime line". full size is 237.93x237.93 if you comment out the priming line. I will upload the profile with the modified printer profile if this bigger version comes out good.

@TripleOnce

Print Profile

200x200mm - 0.08mm layer, 2 walls, 100% infill

It is very pretty and looks great with glow filament. Could you tell me how you do this?

@marcoppari

perfect

@Rharve001

Print Profile

200x200mm - 0.08mm layer, 2 walls, 100% infill

Nice, thank you!

@tinacoffeencats

Print Profile

200x200mm - 0.08mm layer, 2 walls, 100% infill

made it in black and white and it still looks really cool. I do wish the black square it's on was slightly thicker but that's just me 🤷‍♀️

(Edited)

@Gunners_ice

Boosted

Print Profile

200x200mm - 0.08mm layer, 2 walls, 100% infill

fantastic 😍 thanks

@rodneywhaley75

please forgive my ignorance. I am new to Bambu, not printing. I have a x1c, do I just upload to bambu studio, set my filaments and print? Using settings that are in the first profile? or do I set the filament change for the ams?

The designer has replied

@Madness3D

if you have a AMS the profile swaps filaments at the correct layers. if you do not have a AMS you need to download the 3mf and add pause at the correct layer and swap color manually.

@rodneywhaley75

Replying to @Madness3D :

thank you very much, I got it figured out and was able to print this correctly over the weekend using the AMS.